Hydrocarbon Matrices & Petroleum Testing Controls

The premier market product for organometallic calibration, manufactured using stable sulfonate chemical baselines with a commonality of organic base molecules to deliver superior accuracy, precision, and complete miscibility in virtually any non-polar hydrocarbon oil or solvent fluid.

• Single Element Standards: Stocked across 38 distinct elements, mostly at 1,000 ppm and 5,000 ppm (As, Hg, and Se at 100 ppm; Sc at 2,000 ppm), in a 20 cSt mineral oil matrix. Shipped in a convenient 50 g format with an ISO 17025 compliant Certificate of Analysis.
• S-12 & S-21 Multi-Element Blends: Gold standards for Testing of Metals in Oil and wear metals analysis. Blended in a 75 cSt mineral oil matrix across standard concentrations spanning 10 ppm to 900 ppm. S-12 contains a calibrated mix of Ag, Al, Cr, Cu, Fe, Mg, Mn, Na, Ni, Pb, Si, Sn. S-21 contains the complete S-12 matrix augmented with B, Ba, Ca, Cd, Mo, P, Ti, V, Zn.

S-12 and S-21 S-21 only

• Military-Grade D-Series: The original source for Department of Defense Spectrometric Oil Analysis Program wear metals tracking, available in Original and MIL-DTL-85694 compliant formulations across D3, D12, and D19 element matrices.

• Sulfur in Petroleum Products: Tailored standard lines in Crude Oil, Residual Oil, Isooctane, Mineral Oil, and Diesel Fuel to calibrate XRF, ICP, and UV-F analyzers in accordance with regulatory emissions and performance frameworks (including ASTM D2622, D4294, D5453, D6334, and D6443).
• Biodiesel Alternative Standards (B100 / B20 / B5): Specialized multi-element sets matching Ca, K, Mg, Na, and P constraints in biodiesel blends, manufactured in accordance with ASTM D7039, D6751, and EN14214 methods.
• Chlorine Standards: Formulated in mineral oils from 10 to 50,000 ppm to control corrosion risks during crude oil blending or cutting fluid efficiency evaluations.

• FTIR Operational Testing Standards: Highly stable petroleum-oil based fluid configured to look and act like field used-oil samples to calibrate Fourier-Transform Infrared instrument repeatability.
• Flash Point Standards: Certified reference standards spanning 53°C to 260°C for validation testing under ASTM D93 Pensky-Martens closed-cup methods.
• TAN and TBN Standards: Total Acid Number and Total Base Number standards crafted to deliver strong, dramatic inflection points and high pH differentials during potentiometric titrations.
• PartiStan™ Automatic Particle Counter Fluid: Secondary calibration standards directly traceable to NIST SRM 2806b, using ultra-clean hydraulic base fluid and latex sphere suspensions to verify automatic particle counters (APCs) under ISO 11171 parameters.
• PremiSolv™ ICP Solvent: A zero-point alternative to kerosene or xylene for use as a diluent in ICP analysis of metals in oil, tracking an extremely low trace metal content across 34 elements.

One AnalytiChem source for testing petroleum and refined products, made under ISO 17034, ISO/IEC 17025 and ISO 9001.

• Sulfur CRMs: CONOSTAN sulfur standards in 9 stocked matrices from 0 to 50,000 ppm, for ASTM D5453, D2622, D4294, D7039 and D7220.
• Hydrocarbon Standards for GC: Neats, solutions and ready-to-use mixes for ASTM D2887, D3606 and D4815, DRO, GRO, EPH, TPH, VPH, PCB and VOC analysis.
• Physical & Chemical Property Standards: More than 200 CONOSTAN CRMs for TAN, TBN, viscosity and flash point, for ASTM D93, D445, D664, D2896 and D7042, ISO 2719 and IP 34.
• Metal Additive & Contaminant CRMs: CONOSTAN metallo-organic and aqueous ICP standards for RDE, ICP and XRF calibration, QC checks and internal standards, for IP 501, IP 377, ASTM D5184, D5708, D5863, D6728 and D6751. Custom blends on request.
• Instrument Consumables: Stocked XRF sample cups and film, autosampler tubes, nebulizers, spray chambers, torches and pump tubing.
• Microbial Content Test Kit: Bacteria and fungi screening for fuel systems from upstream to downstream, with no complex incubation or storage. Available in the UAE through Viyon.